User Manual Q&AAnswer
Nov 08, 2024 - 03:54 AM
Connecting the JA-B3W Mini Cube Speakers to your amplifier or AV receiver is a simple process. Here are the steps to follow:
1. Turn off the power to both the speakers and the amplifier or AV receiver before making any connections to avoid electrical shock.
2. Identify the speaker terminals on the back of each cube speaker. They are usually labeled as positive (+) and negative (-).
3. Strip the insulation from the ends of your speaker wires to expose the bare wire.
4. Match the positive (+) and negative (-) terminals on the cube speakers with the corresponding terminals on your amplifier or AV receiver.
5. Insert the bare wire ends into the appropriate terminals on the cube speakers and tighten the terminals to secure the connection. Ensure that the positive and negative wires are correctly matched to the corresponding terminals to maintain proper polarity.
6. Repeat the process for each cube speaker, connecting them to the appropriate channels on your amplifier or AV receiver.
7. Once all the connections are made, double-check that each wire is securely connected and that there are no loose strands of wire that could cause a short circuit.
8. After confirming the connections, you can turn on the power to the speakers and the amplifier or AV receiver.
Please refer to the user manual for your specific amplifier or AV receiver for any additional instructions or settings that may be required for optimal performance with the JA-B3W Mini Cube Speakers.
Add New Comment