Answer
Nov 08, 2024 - 03:51 AM
To connect the Polk Audio AM4385 Outdoor Passive Subwoofer to your amplifier or receiver, follow these steps:
1. Locate the provided junction box that comes with the subwoofer.
2. Identify the speaker wire outputs on your amplifier or receiver. These are typically labeled as "Subwoofer Out" or "LFE Out."
3. Connect one end of the speaker wire to the positive (+) terminal on the subwoofer's junction box.
4. Connect the other end of the speaker wire to the corresponding positive (+) terminal on your amplifier or receiver.
5. Repeat steps 3 and 4 for the negative (-) terminals, ensuring that the polarity is maintained (positive to positive, negative to negative).
6. Ensure that all connections are secure and tightened.
7. Power on your amplifier or receiver and adjust the subwoofer's volume control to your desired level.
Note: It is important to use appropriate speaker wire for the connection. Ensure that the wire gauge is suitable for the length of the run and the power requirements of the subwoofer. Consult the user manual of your amplifier or receiver for specific instructions on connecting a passive subwoofer.
For further guidance or troubleshooting, refer to the user manual of the Polk Audio AM4385 Outdoor Passive Subwoofer or contact the manufacturer's customer support for assistance.
Add New Comment