User Manual Q&AAnswer
Nov 08, 2024 - 03:28 AM
To connect your microphone to the Rolls MX122 MiniMix Pro Mixer, follow these steps:
1. Locate the Mic Input Channel 1 on the mixer. It is a balanced XLR jack located on the front panel.
2. Plug your microphone's XLR cable into the Mic Input Channel 1.
3. If your microphone requires phantom power, make sure the Phantom Power switch is turned on. The switch is located on the front panel near the Mic Input Channel 1.
4. Adjust the Mic Level control for Channel 1 to set the signal level of your microphone. This control is located on the front panel and is specific to Channel 1.
5. Use the Pan control for Channel 1 to adjust the relative level of the microphone signal to the Right and Left Outputs. This control is also located on the front panel and is specific to Channel 1.
Please refer to the Rolls MX122 MiniMix Pro Mixer Quick Start Guide for more detailed instructions and illustrations.
Source: To connect your microphone to the Rolls MX122 MiniMix Pro Mixer, follow these steps: 1. Locate the Mic Input Channel 1 on the mixer. It is a balanced XLR jack located on the front panel. 2. Plug your microphone's XLR cable into the Mic Input Channel 1. 3. If your microphone requires phantom power,
Add New Comment