Answer
Nov 08, 2024 - 03:26 AM
To connect the BIRX Mixing Board Sound Card to your computer, follow these steps:
1. Ensure that your computer is powered on and the sound card is turned off.
2. Locate the USB port on the sound card and the corresponding USB port on your computer.
3. Take the provided USB cable and connect one end to the USB port on the sound card.
4. Connect the other end of the USB cable to the USB port on your computer.
5. Turn on the sound card.
6. Your computer should recognize the sound card as a new audio device.
7. Install any necessary drivers for the sound card if prompted by your computer.
8. Open your recording software and select the BIRX Mixing Board Sound Card as the input and output device.
Note: The specific steps may vary depending on your operating system and recording software. Refer to the user manual for detailed instructions on connecting the sound card to your specific setup.
Add New Comment