User Manual Q&AAnswer
Nov 08, 2024 - 02:07 AM
To connect your laptop to the TouYinger X21 projector, please follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI input port on the back of the projector.
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Power on both your laptop and the projector.
6. On the projector remote control, press the "Source" button to select the HDMI input source.
7. On your laptop, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the option to extend or duplicate your laptop screen to the projector. This may vary depending on your operating system.
9. Adjust the focus and keystone on the projector, if needed, to ensure a clear and properly aligned image.
Your laptop screen should now be displayed on the TouYinger X21 projector. If you encounter any issues, please refer to the user manual for further troubleshooting steps or contact the manufacturer's customer support for assistance.
Add New Comment