User Manual Q&AAnswer
Nov 08, 2024 - 02:03 AM
To connect your smartphone to the Henhoor S9 Native 1080P WIFI Projector, you can use either wireless or wired connections. Here are the step-by-step instructions for both methods:
Wireless Connection:
1. Make sure both the projector and your smartphone are connected to the same home WiFi network with a speed greater than 50 Mbps.
2. On the projector, go to the menu and access the wireless settings.
3. Enable the WiFi option and wait for the projector to scan for available networks.
4. Select your home WiFi network from the list and enter the password if prompted.
5. Once connected, the projector will display the IP address assigned to it.
6. On your smartphone, go to the settings and select the WiFi option.
7. Find and connect to the same home WiFi network that the projector is connected to.
8. Open the content you want to stream on your smartphone (e.g., a video or photo).
9. Look for the screen mirroring or casting option on your smartphone (this may vary depending on the device).
10. Select the projector from the list of available devices.
11. The content from your smartphone should now be mirrored on the projector's screen.
Wired Connection:
1. Ensure that your smartphone supports video output via USB (e.g., USB-C or MHL).
2. Connect one end of a compatible USB cable to your smartphone and the other end to the USB port on the projector.
3. On the projector, go to the menu and select the USB input as the video source.
4. Your smartphone's screen should now be displayed on the projector.
Please note that the specific steps may vary slightly depending on your smartphone model and operating system. Refer to your smartphone's user manual for more detailed instructions on screen mirroring or casting.
For further assistance, you can refer to the user manual provided with the Henhoor S9 Native 1080P WIFI Projector for additional information and troubleshooting tips.
Add New Comment