User Manual Q&AAnswer
Nov 08, 2024 - 12:23 AM
To pair a device to the RM169 mixer, follow these steps:
1. On your device, enable Bluetooth and make sure it is in discoverable mode.
2. On the RM169 mixer, locate the Bluetooth pairing mode. This is typically indicated by a steady blue LED light.
3. On your device, search for available Bluetooth devices and select the RM169 (ROLLSBT) from the list.
4. Once connected, the blue LED light on the RM169 mixer will start blinking slowly, indicating that it is paired but no audio is being sent.
5. To start sending audio, play music or audio on your device. The blue LED light on the RM169 mixer will start blinking faster, indicating that audio is being sent.
Note: If you want to pair a different device, press the reset button on the RM169 mixer to stop the current pairing. Make sure the previously paired device is turned off or out of range. The RM169 mixer will remember the last paired device and continuously search for it until a different device is paired. When powered off and on again, the RM169 mixer will automatically search for and reconnect to the previously paired device.
For more detailed instructions, please refer to the user guide provided with the RM169 Professional Bluetooth Audio Mixer.
Add New Comment