User Manual Q&AAnswer
Nov 08, 2024 - 12:14 AM
To connect the NUOPAIPLUS N9 Plus Professional Audio Mixer to your computer, follow these steps:
1. Ensure that your computer is powered on and the NUOPAIPLUS N9 Plus Professional Audio Mixer is turned off.
2. Locate the USB data cable included in the package. Connect one end of the USB cable to the USB port on the audio mixer (labeled "USB").
3. Connect the other end of the USB cable to an available USB port on your computer.
4. Power on the NUOPAIPLUS N9 Plus Professional Audio Mixer by pressing the power button.
5. Your computer should recognize the audio mixer as a USB audio device. If prompted, install any necessary drivers or software provided by NUOPAIPLUS.
6. Open your preferred audio recording or streaming software on your computer.
7. In the software settings, select the NUOPAIPLUS N9 Plus Professional Audio Mixer as the input and output device.
8. Adjust the input gain levels on the audio mixer to set the appropriate signal level for your microphones or instruments. Avoid overloading the inputs by monitoring the input level indicators on the mixer.
9. Customize the EQ settings and explore the available sound effects and tone adjustments on the audio mixer to enhance your audio output creatively.
10. Start recording or streaming using your preferred software, and you should now be able to capture high-quality audio from the NUOPAIPLUS N9 Plus Professional Audio Mixer.
Note: Make sure to consult the user manual for specific instructions and recommendations for your particular setup.
Add New Comment