User Manual Q&AAnswer
Nov 07, 2024 - 11:58 PM
To connect your audio sources to the ZHIERPLUS Cx400 Stereo Mini Mixer, follow these steps:
1. Identify the audio sources you want to connect, such as instruments, CD players, tape players, computers, mobile phones, or tablets.
2. Locate the four stereo RCA input channels on the mixer labeled as IN 1-4.
3. Use RCA cables to connect the audio output of your sources to the corresponding input channels on the mixer. For example, connect the output of your instrument or CD player to IN 1, the output of your tape player to IN 2, and so on.
4. Once the audio sources are connected to the input channels, you can adjust the volume levels for each channel using the four individual 100K potentiometers on the mixer. These potentiometers allow precise control over the signal levels of each input channel.
5. Finally, connect the RCA output of the mixer to your desired output device, such as a mixer, amplifier, or speakers. This will allow you to hear the mixed audio from the connected sources.
By following these steps, you can successfully connect and control your audio sources using the ZHIERPLUS Cx400 Stereo Mini Mixer. For more detailed instructions, refer to the user manual provided with the product.
Add New Comment