User Manual Q&AAnswer
Nov 07, 2024 - 11:56 PM
To pair the transmitter with the receiver in the Audio-Technica ATW-1701 Portable Camera Mount Wireless System, follow these steps:
1. Turn on the receiver by pressing and holding the power button until the power/battery indicator glows green.
2. Press the system ID select switch on the rear panel of the receiver to choose an ID number from 1 to 8.
3. Within 15 seconds, press and hold the pairing switch on the rear panel of the receiver.
4. Open the transmitter (either the handheld or the UniPak® body-pack) and press and hold its pairing switch within 30 seconds.
5. The receiver's pairing indicator will flash green during the pairing process.
6. Once the pairing is successful, the receiver's pairing indicator will glow steady green, indicating that the transmitter is paired with the receiver.
7. Repeat the above steps for additional transmitters, ensuring that each transmitter has a unique ID number.
If you are still experiencing issues with pairing, make sure that both the transmitter and receiver have fresh batteries installed and are within the operating range of each other. Also, ensure that there are no other wireless devices or sources of interference nearby that may affect the pairing process.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Audio-Technica ATW-1701 Portable Camera Mount Wireless System.
Add New Comment