User Manual Q&AAnswer
Nov 07, 2024 - 11:48 PM
To connect the Roland DJ-707M Four-Deck Serato DJ Controller to your computer, follow these steps:
1. Make sure your computer is powered on and running Serato DJ Pro software.
2. Connect the included USB cable to the USB port on the back of the DJ-707M controller.
3. Connect the other end of the USB cable to an available USB port on your computer.
4. Once the controller is connected, it will automatically be recognized by Serato DJ Pro.
5. Launch Serato DJ Pro software on your computer.
6. In the software, go to the "Setup" menu and select "MIDI" from the options.
7. In the MIDI tab, make sure the DJ-707M is selected as the MIDI device.
8. You may need to adjust the audio settings in Serato DJ Pro to ensure the DJ-707M is selected as the audio device for playback and recording.
9. Once the controller is connected and the settings are configured, you can start using the DJ-707M with Serato DJ Pro.
For more detailed instructions and information on setting up the Roland DJ-707M Four-Deck Serato DJ Controller, please refer to the user manual provided with the product.
Add New Comment