User Manual Q&AAnswer
Nov 07, 2024 - 11:47 PM
To pair the VOLT+ Plus TECH Wireless Bluetooth Earbuds with your device, follow these steps:
1. Charge the earbuds by placing them in the charging case and connecting the case to a power source using the provided charging cable.
2. Once the earbuds are fully charged, remove them from the case.
3. Enable Bluetooth on your paired device (e.g., smartphone, tablet) by going to the Bluetooth settings.
4. On the earbuds, put them into pairing mode. This is typically done by turning them on and holding the touch control area on both earbuds simultaneously until you see flashing LED lights or hear a pairing prompt.
5. On your device, search for available Bluetooth devices. Look for "VOLT+ Plus TECH" or the corresponding device name. Tap on it to connect.
6. Once the earbuds are successfully paired, you should hear a confirmation sound or see a notification on your device.
Note: The specific steps may vary slightly depending on the model and firmware version of your VOLT+ Plus TECH earbuds. Please refer to the user manual provided with your earbuds for detailed instructions specific to your model.
If you encounter any issues during the pairing process, make sure the earbuds are fully charged, within the effective Bluetooth range of your device (usually around 30 feet or 10 meters), and that your device's Bluetooth is turned on and not connected to other Bluetooth devices that may interfere.
Add New Comment