User Manual Q&AAnswer
Nov 07, 2024 - 11:28 PM
Mounting the JA-D2 Diamond Cube Speakers on a wall is a straightforward process. Here are the step-by-step instructions:
1. Determine the ideal position for your speakers to achieve the best surround sound experience. This could be on the walls, preferably at ear level when seated, both at the front and rear of the listening area.
2. Once you have identified the ideal positions, use the included mounting brackets and screws. Ensure that the wall is sturdy enough to hold the speakers.
3. Mark the xxxx positions on the wall using a pencil or marker. Double-check the measurements and alignment to ensure accuracy.
4. Drill pilot holes at the marked positions using an appropriate drill bit. The size of the drill bit should match the size of the screws provided with the mounting brackets.
5. Attach the mounting brackets to the wall using the screws. Make sure they are securely fastened to provide stability for the speakers.
6. Once the brackets are securely attached, place the JA-D2 Diamond Cube Speakers onto the brackets. They should easily slide or snap into place.
7. Adjust the swivel design of the speakers to direct the sound towards the desired listening area. This will help optimize the surround sound experience.
Please refer to the user manual for any specific instructions or diagrams related to mounting the speakers on a wall.
Add New Comment