Answer
Nov 07, 2024 - 10:40 PM
To connect the MXIAOXIA M600 Digital Audio Mixer to your computer via USB, follow these steps:
1. Make sure both the audio mixer and your computer are powered off.
2. Locate the USB port on the audio mixer. It is usually labeled "USB" or "USB Input."
3. Connect one end of a USB cable to the USB port on the audio mixer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Power on both the audio mixer and your computer.
6. Your computer should recognize the audio mixer as a USB audio device.
7. Depending on your operating system, you may need to install drivers for the audio mixer. Refer to the user manual or the manufacturer's website for specific driver installation instructions.
8. Once the audio mixer is connected and recognized by your computer, you can use it as an audio input and output device for your computer.
Please refer to the user manual for more detailed instructions on connecting the MXIAOXIA M600 Digital Audio Mixer to your computer via USB.
Add New Comment