User Manual Q&AAnswer
Nov 07, 2024 - 10:21 PM
To connect the KEF T2 subwoofer to your amplifier or receiver, please follow these steps:
1. Locate the LFE subwoofer output on your amplifier or receiver. This is typically labeled as "Subwoofer Out" or "LFE Out."
2. Use an RCA cable to connect the LFE subwoofer output on your amplifier or receiver to the "Line in" input socket on the rear panel of the KEF T2 subwoofer.
3. Make sure all other inputs on the subwoofer are disconnected.
4. Set the subwoofer frequency on your amplifier or receiver to 120Hz. Refer to the manual of your amplifier or receiver for instructions on how to adjust the subwoofer frequency.
5. Ensure that the satellites (main speakers) in your system are set to the appropriate configuration in the amplifier or receiver menu. This may involve setting the speakers to "small" or enabling the subwoofer output. Refer to the manual of your amplifier or receiver for instructions.
6. Adjust the subwoofer volume on your amplifier or receiver to your desired level. Refer to the manual of your amplifier or receiver for instructions on how to adjust the subwoofer volume.
Once you have completed these steps, the KEF T2 subwoofer should be properly connected to your audio system and ready to enhance your listening experience.
Add New Comment