User Manual Q&AAnswer
Nov 07, 2024 - 10:06 PM
Sure! Here are the step-by-step instructions for setting up the IOGEAR GW3DHDKIT Wireless 3D Digital Kit:
1. Transmitter Setup:
a. Connect your source devices (such as Blu-ray players or gaming consoles) to the transmitter's "HDMI IN" ports using HDMI cables.
b. Optionally, if you want to use the IR Blaster feature, plug the IR blaster cable into the "IR OUT" port of the transmitter.
c. For a two TV setup, connect the local TV to the transmitter's "HDMI OUT" port for the loop-through connection.
d. Connect the power adapter to the DC socket of the transmitter to power it up.
2. Receiver Setup:
a. Connect your TV to the HDMI port of the receiver using the included HDMI cable.
b. Connect the supplied power adapter to the mini USB port of the receiver to power it up.
3. Basic Operation:
a. Turn on your TV and select the HDMI source input to which the receiver is connected.
b. Turn on your source device and press the "SOURCE" button on the remote control or on the top of the receiver/transmitter to select the specific source device (HDMI 1 or HDMI 2).
c. The power LED on the transmitter and receiver should stay solid blue, indicating a successful connection. You should see the video being broadcasted from your source device on your TV.
4. IR Blaster (Optional):
a. If you want to use the IR Blaster feature, plug the IR blaster cable into the IR OUT port of the transmitter.
b. Refer to your devices' user manual to locate the IR sensor and manually move the IR blaster to identify a good position for IR response.
c. When the connection is established, the transmitter relays infrared commands from your receiver to devices, allowing you to control your Blu-ray player or set-top box remotely.
Please refer to the IOGEAR GW3DHDKIT Wireless 3D Digital Kit User Guide for more detailed information and troubleshooting tips.
Add New Comment