Answer
Nov 07, 2024 - 09:54 PM
To connect your TV to the TimoLabs TM-SS2020BT-2015B Sound Stand System, follow these steps:
1. Determine the type of audio output available on your TV. Most TVs today have three types of audio outputs: optical digital audio, coaxial digital audio, and analog stereo audio.
2. Choose the highest quality audio output available on your TV. Optical digital audio is recommended for the best audio performance, followed by coaxial digital audio. If these options are not available, you can use the analog stereo audio output.
3. Plug one end of the selected audio cable into the corresponding audio output on your TV.
4. Plug the other end of the audio cable into the corresponding audio input on the TimoLabs TM-SS2020BT-2015B Sound Stand System.
5. If desired, you can slide the cable into the built-in cable clip for neatness.
6. Once the audio connection is made, you can turn on the sound stand system and your TV.
7. To ensure that you hear the TV audio through the sound stand system and not the TV's built-in speakers, you need to turn off the TV's internal speakers. This can usually be done through the TV's setup menu or by adjusting the TV volume to its lowest setting.
8. If your TV has a set-up menu, use the remote that came with your television to locate the menu item and set the TV speakers to off. If your TV does not have a menu setting for turning off the internal speakers, exit the audio menu and reduce the TV volume to its lowest setting.
9. Confirm that the TV speakers are off by pressing the Mute button on the TimoLabs TM-SS2020BT-2015B Sound Stand System remote and checking that no sound is coming from the TV.
By following these steps, you should be able to successfully connect your TV to the TimoLabs TM-SS2020BT-2015B Sound Stand System and enjoy enhanced audio performance while watching TV.
Add New Comment