Answer
Nov 07, 2024 - 09:32 PM
To connect the UHF-3200 receiver to a sound system or mixer, follow these steps:
1. Ensure that the receiver and sound system/mixer are both powered off.
2. Locate the AC power adapter that came with the UHF-3200 receiver and connect it to the POWER INPUT connector on the receiver. Then, plug the adapter into a compatible AC electrical outlet.
3. Attach the included antennas to the receiver by screwing them in until they are secure. Make sure the antennas are pointing as straight up as possible.
4. Determine how you want to connect the receiver to your sound system/mixer. There are two options:
a. Independent Mic Channels: If you want to connect each microphone channel independently to separate input channels on your sound system/mixer, use a 1/4" cable to connect the CH. A OUT and CH. B OUT outputs on the receiver to individual input channels on your sound system/mixer.
b. Mixed Mic Channels: If you want to use the mixed output to connect both microphone channels to a single input channel on your sound system/mixer, use a 1/4" cable to connect the MIX OUT jack on the receiver to an input jack on your sound system/mixer.
5. Once you have made the appropriate connections, power on the receiver and your sound system/mixer.
6. Adjust the volume controls on the receiver to set the desired output levels for each microphone channel. You can use the individual volume controls on the front panel of the receiver to adjust the volume for each channel.
7. Test the microphone system by speaking or singing into the microphones. Adjust the volume controls on the receiver as needed to balance the output levels of the microphones with the rest of your sound system.
Note: For more detailed instructions and information, please refer to the VocoPro UHF-3200 UHF-Dual Channel Wireless Microphone System Owner's Manual.
Add New Comment