User Manual Q&AAnswer
Nov 07, 2024 - 09:17 PM
To connect your devices to the EPSON EH-TW5700 Home Projector, follow these steps:
1. Make sure the projector and your devices are powered off.
2. Locate the HDMI ports on the back of the projector. The EH-TW5700 has two HDMI ports.
3. Connect one end of an HDMI cable to the HDMI output port on your Blu-ray player.
4. Connect the other end of the HDMI cable to one of the HDMI ports on the projector.
5. Repeat steps 3 and 4 for your gaming console or any other devices you want to connect.
6. Power on your devices and the projector.
7. Use the remote control or the projector's control panel to select the HDMI input that corresponds to the device you want to use.
Note: If you want to connect additional devices, such as a laptop or a streaming device, you can use the available HDMI ports in the same way. Additionally, if your device does not have an HDMI output, you may need to use an HDMI adapter or converter to connect it to the projector.
For more detailed instructions and illustrations, please refer to the EPSON EH-TW5700 Home Projector User's Guide provided above.
Add New Comment