User Manual Q&AAnswer
Nov 07, 2024 - 09:13 PM
To connect external devices to your Optoma UHZ50 DLP Smart Laser Projector, follow these steps:
1. Ensure that both the projector and the external devices are powered off.
2. Locate the HDMI ports on the back of the projector. The UHZ50 has two HDMI ports for connecting multiple devices.
3. Connect one end of an HDMI cable to the HDMI output port of your Blu-ray player or gaming console.
4. Connect the other end of the HDMI cable to one of the HDMI input ports on the projector.
5. Repeat steps 3 and 4 if you have additional devices to connect.
6. Power on the external devices and the projector.
7. Use the projector's remote control to navigate to the HDMI input source corresponding to the device you want to use.
8. Once the HDMI input source is selected, you should see the content from your Blu-ray player or gaming console displayed on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Optoma UHZ50 DLP Smart Laser Projector.
Add New Comment