User Manual Q&AAnswer
Nov 07, 2024 - 09:10 PM
To connect the Pioneer SP-C22 speaker system to your stereo amplifier, please follow these steps:
1. Before making any connections, make sure that all equipment is turned off.
2. Identify the speaker output terminals on your stereo amplifier. Look for terminals labeled "speaker output" or similar.
3. Strip off approximately 1/2 inch of insulation from the ends of your speaker cable. Twist the bare strands of the cable to prevent fraying.
4. Connect one end of the speaker cable to the positive (+) terminal of the amplifier. The positive terminal is usually labeled with a red color or a "+" symbol.
5. Connect the other end of the speaker cable to the positive (+) terminal of the Pioneer SP-C22 speaker. The positive terminal on the speaker is also usually labeled with a red color or a "+" symbol.
6. Repeat steps 4 and 5 to connect the negative (-) terminals of the amplifier and speaker. The negative terminal is usually labeled with a black color or a "-" symbol.
7. Make sure that the connections are secure and that no stray strands of wire are touching between the terminals.
8. Once all the connections are made, you can turn on your stereo amplifier and start enjoying your Pioneer SP-C22 speaker system.
Note: It is important to observe the impedance rating of the speaker system and ensure that it is compatible with your stereo amplifier. The Pioneer SP-C22 speaker system has a nominal impedance of 6 ohms, so make sure your amplifier can handle a load impedance ranging from 4 to 16 ohms.
For more detailed information and illustrations, please refer to the "Connecting Your System" section in the Pioneer SP-C22 Home Audio Speaker System Operating Guide.
Add New Comment