Answer
Nov 07, 2024 - 08:48 PM
Setting up the VocoPro NuVOICE UG-3 Wireless Instrument System is a straightforward process. Here are the steps to get started:
1. Connect the receiver: Start by connecting the dual-channel receiver to your sound system or mixer using either the 1/4-inch or XLR balanced outputs. Ensure that the receiver is powered on and ready to receive signals.
2. Power on the transmitter: Open the battery compartment of the bodypack transmitter and insert the required batteries. Make sure to match the polarity correctly. Close the battery compartment and power on the transmitter.
3. Pair the transmitter and receiver: Press and hold the "Pair" button on the receiver until the LED indicators start flashing. Then, press and hold the "Pair" button on the transmitter until the LED indicator on the transmitter and receiver turn solid, indicating a successful pairing.
4. Test the connection: Plug your instrument into the bodypack transmitter using the provided instrument cable. Play your instrument and check if the sound is transmitted wirelessly to the receiver. Adjust the volume levels on your instrument and the receiver as needed.
5. Fine-tune the settings: If you encounter any interference or signal dropouts, you can use the auto-scan function on the receiver to find the clearest frequency channels. Refer to the owner's manual for detailed instructions on using the auto-scan function.
For more detailed instructions and troubleshooting tips, please refer to the VocoPro NuVOICE UG-3 Wireless Instrument System Owner's Manual provided above.
Add New Comment