Answer
Nov 07, 2024 - 08:25 PM
To connect audio sources to the Ammoon HA400 4-Channel Line Mono Audio Mixer, follow these steps:
1. Identify the audio input jacks on the mixer. The HA400 has 1/4'' TS connectors for input.
2. For microphones or instruments with 1/4'' output jacks, use 1/4'' TS cables to connect them to the corresponding input channels on the mixer. Plug one end of the cable into the microphone or instrument, and the other end into the input jack on the mixer.
3. For playback devices with stereo output, such as CD players or media players, use a stereo 1/4'' TRS cable. Plug one end of the cable into the stereo output jack of the playback device, and the other end into one of the stereo input jacks on the mixer.
4. Repeat the above steps for each audio source you want to connect, making sure to use the appropriate cables and input jacks.
5. Once all the audio sources are connected, you can adjust the gain, equalization, and effects settings on each channel to match the audio input.
6. Use the headphone monitoring feature to listen to your audio mix in real time. Connect your headphones to the headphone output jack on the mixer.
7. To complete the setup, connect the mixer's output to amplifiers or recording equipment using 1/4'' TRS cables. Plug one end of the cable into the output jack on the mixer, and the other end into the input jack of the amplifier or recording device.
Please refer to the user manual for more detailed instructions and illustrations on connecting audio sources to the Ammoon HA400 4-Channel Line Mono Audio Mixer.
Add New Comment