User Manual Q&AAnswer
Nov 07, 2024 - 08:18 PM
To connect the Spyn SX-1 2-Channel DJ Mixer with USB to your computer, follow these steps:
1. Make sure your computer is powered on and running.
2. Locate the USB port on the back of the mixer.
3. Take the USB cable that came with the mixer and connect one end to the USB port on the mixer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the mixer is connected to your computer, it should be recognized as a USB audio device.
6. Depending on your operating system, you may need to install drivers for the mixer. Refer to the user manual or the manufacturer's website for specific driver installation instructions.
7. Once the drivers are installed, you can use your preferred DJ software to record and playback audio through the mixer.
8. Configure the audio settings in your DJ software to use the Spyn SX-1 as the audio input and output device.
9. You can now start recording and playing back audio through the mixer using your computer.
Note: It's important to ensure that the mixer is powered on and connected to your computer before launching your DJ software. This will ensure that the software recognizes the mixer as the audio device.
For more detailed instructions and troubleshooting tips, refer to the user manual that came with the Spyn SX-1 2-Channel DJ Mixer with USB.
Add New Comment