Answer
Nov 07, 2024 - 08:09 PM
To connect microphones to the Azden FMX-32A 3-Channel Portable Field Mixer, follow these steps:
1. Identify the XLR inputs on the side panel of the mixer. There are three XLR inputs labeled as CH 1, CH 2, and CH 3.
2. Take the 3-pin XLR output of your microphone and plug it into the corresponding XLR input on the mixer. For example, if you want to connect a microphone to channel 1, plug it into the CH 1 XLR input.
3. Push the XLR connector into the input jack until it locks. This ensures a secure connection.
4. If you need to remove the XLR connector, press the "PUSH" tab while pulling the connector out.
5. Repeat the process for each microphone you want to connect, using the appropriate XLR input for each channel.
Please refer to the "Side Panels" section of the operating manual for visual references and additional information on connecting XLR inputs.
Add New Comment