Answer
Nov 07, 2024 - 08:07 PM
To connect audio sources to the Recordio GAX-800 Professional USB Audio Mixer, follow these steps:
1. Gather the necessary cables: Depending on the type of audio sources you have, you may need XLR cables for microphones, instrument cables for instruments, or RCA cables for media players.
2. Identify the input channels: The mixer has multiple input channels, typically labeled with numbers or names. Each channel corresponds to a specific audio input.
3. Connect microphones: If you have microphones, use XLR cables to connect them to the XLR input jacks on the mixer. Match the XLR cable connectors to the corresponding input jacks, ensuring a secure connection.
4. Connect instruments: For instruments, use instrument cables to connect them to the 1/4-inch input jacks on the mixer. Again, match the cable connectors to the appropriate input jacks.
5. Connect media players or other audio sources: If you have media players or other audio sources, use RCA cables to connect them to the RCA input jacks on the mixer. Make sure to match the cable connectors to the correct input jacks.
6. Repeat for additional audio sources: If you have more audio sources, repeat the above steps for each source, connecting them to different input channels on the mixer.
7. Verify connections: Once all the audio sources are connected, double-check the connections to ensure they are secure and properly plugged in.
By following these steps, you will be able to connect your microphones, instruments, and other audio sources to the Recordio GAX-800 Professional USB Audio Mixer for audio mixing. For more detailed instructions and illustrations, refer to the user manual provided with the mixer.
Add New Comment