Answer
Nov 07, 2024 - 04:29 AM
To connect microphones and instruments to the HNKDD B4-LIVE 4-Channel Audio Mixer, follow these steps:
1. Identify the input channels: The mixer has four input channels labeled as Channel 1, Channel 2, Channel 3, and Channel 4.
2. Microphone connection: For connecting microphones, locate the XLR input jacks on the mixer. These are usually labeled as MIC/LINE. Plug the XLR connector of the microphone into the corresponding XLR input jack of the desired channel. Ensure that the microphone is securely connected.
3. Instrument connection: For connecting instruments, locate the 1/4" TRS input jacks on the mixer. These are usually labeled as LINE. Plug the instrument cable into the 1/4" TRS input jack of the desired channel. If your instrument has a different type of output, you may need an adapter to connect it to the mixer.
4. Adjust input levels: Once the microphones and instruments are connected, use the level knobs or faders for each channel to adjust the input levels. Start with the levels low and gradually increase them until you achieve the desired volume without clipping or distortion.
5. Test the audio: After connecting and adjusting the input levels, test the audio by speaking into the microphones or playing the instruments. Use the mixer's output controls to adjust the overall volume.
Refer to the user manual for specific details on the input jacks and controls of the HNKDD B4-LIVE 4-Channel Audio Mixer.
Add New Comment