User Manual Q&AAnswer
Nov 07, 2024 - 03:57 AM
To connect the Klipsch KB-15 Icon Bookshelf Speakers to your amplifier, follow these steps:
1. Using 16-gauge or larger speaker wire, connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
2. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
3. Repeat this procedure for connecting all remaining speakers to the appropriate amplifier channels.
4. Make sure that no bare wires from any of the connections touch any other terminals to avoid shorting and damaging your equipment.
Note: Some Icon speakers come with dual binding posts that are connected by a metal strip. Do not remove this strip as it is necessary for the speakers to function correctly. Connect your speaker wire to the top set of the binding posts. If your receiver supports bi-wiring, refer to your receiver's manual for further instructions.
Please refer to Figure 3 in the user manual for a visual representation of the connection setup.
Add New Comment