User Manual Q&AAnswers
Nov 07, 2024 - 03:28 AM
To connect the Artesia AMC-10 Studio Condenser Microphone to your audio interface or mixer, follow these steps:
1. Make sure your audio interface or mixer is turned off and the volume control is set to the minimum position.
2. Locate the XLR connector on the microphone. It is a three-pin connector.
3. Take the XLR cable (not included in the box) and securely connect one end to the XLR connector on the microphone.
4. Connect the other end of the XLR cable to the corresponding XLR input on your audio interface or mixer.
5. If your microphone requires phantom power (typically 48V) to operate, make sure your audio interface or mixer can provide phantom power. Consult the user manual of your audio interface or mixer for instructions on how to activate phantom power.
6. Once the XLR cable is securely connected and phantom power is active (if required), you can turn on your audio interface or mixer.
7. Adjust the volume control on your audio interface or mixer from low to high until you've obtained the desired level.
By following these steps, you should be able to properly connect the Artesia AMC-10 Studio Condenser Microphone to your audio interface or mixer for recording or live sound applications.
Nov 07, 2024 - 03:30 AM
To connect the Artesia AMC-10 Studio Condenser Microphone to your audio interface or mixer, follow these steps:
1. Make sure your audio interface or mixer is turned off and the volume control is set to the minimum position.
2. Locate the XLR connector on the microphone. It is a three-pin connector.
3. Take the XLR cable (not included in the box) and securely connect one end to the XLR connector on the microphone.
4. Connect the other end of the XLR cable to the corresponding XLR input on your audio interface or mixer.
5. If your microphone requires phantom power (typically 48V) to operate, make sure your audio interface or mixer can provide phantom power. Consult the user manual of your audio interface or mixer for instructions on how to activate phantom power.
6. Once the XLR cable is securely connected and phantom power is active (if required), you can turn on your audio interface or mixer.
7. Adjust the volume control on your audio interface or mixer from low to high until you've obtained the desired level.
By following these steps, you should be able to properly connect the Artesia AMC-10 Studio Condenser Microphone to your audio interface or mixer for recording or live sound applications.
Add New Comment