Answer
Nov 07, 2024 - 03:00 AM
To connect microphones and instruments to the Ammoon AM-4R Audio Mixer, follow these steps:
1. Identify the input channels on the mixer. The AM-4R typically has multiple input channels labeled as "Channel 1," "Channel 2," and so on.
2. For microphones: Use XLR cables to connect the microphones to the XLR input jacks on the mixer. Plug one end of the XLR cable into the microphone and the other end into the corresponding XLR input jack on the mixer.
3. For instruments: Use 1/4" TRS cables to connect instruments to the line input jacks on the mixer. Plug one end of the 1/4" TRS cable into the instrument's output jack and the other end into the line input jack on the mixer.
4. Ensure that the gain xxxx for each channel is set appropriately. The gain xxxx controls the input level of the microphone or instrument. Adjust the gain xxxx to achieve optimal audio levels without distortion.
5. Repeat the above steps for each microphone or instrument you want to connect to the mixer.
Note: The specific details and connections may vary slightly depending on your setup and the type of microphones or instruments you are using. Refer to the user manual for the Ammoon AM-4R Audio Mixer for more detailed instructions and illustrations.
Add New Comment