Answer
Nov 07, 2024 - 02:44 AM
To connect the ELAC CC241.4 Carina Center Channel Speaker to your amplifier, follow these steps:
1. Ensure that your amplifier is turned off before making any connections.
2. Use appropriate gauge wires (minimum of 12 gauge wire for runs up to 25 feet) to connect the speaker to your amplifier.
3. Make sure wire polarity is connected correctly. Most speaker cables are coded for ease of use. Connect the positive (red) connection on the amplifier terminal to the positive (red) on your speaker, and the negative connection to the negative terminal.
4. Strip off approximately 1/2" of the insulation from the ends of the speaker cable, twist the bare strands, and insert them into the binding post on the speaker.
5. Ensure that the positive and negative wires are not touching each other once they're connected to the speaker terminals.
6. Repeat the above steps for each speaker you want to connect to your amplifier.
Please refer to the "Speaker Connections" section in the operating instructions for more detailed information and diagrams on connecting the ELAC CC241.4 Carina Center Channel Speaker.
Add New Comment