User Manual Q&AAnswer
Nov 07, 2024 - 01:58 AM
To connect the Movo VSM-7 microphone to your audio interface, please follow these steps:
1. Ensure that your audio interface is turned off and unplugged from the power source.
2. Locate the XLR connector on the back of the Movo VSM-7 microphone.
3. Take the provided XLR cable and connect one end to the XLR connector on the microphone.
4. Locate the XLR input on your audio interface. It is usually labeled as "MIC" or "XLR."
5. Connect the other end of the XLR cable to the XLR input on your audio interface.
6. Make sure the connection is secure by firmly tightening the connectors.
7. If your audio interface requires phantom power, activate it by following the instructions provided with your audio interface. Phantom power is typically required for condenser microphones like the Movo VSM-7.
8. Once the microphone is connected, you can turn on your audio interface and adjust the input gain or sensitivity settings as needed.
9. You are now ready to use the Movo VSM-7 microphone with your audio interface for recording or live sound applications.
Please refer to the user manual for your specific audio interface for any additional instructions or settings that may be required.
Add New Comment