User Manual Q&AAnswer
Nov 07, 2024 - 01:45 AM
To connect the Klipsch R-30C Reference Horn-Loaded Center Channel Speakers to your amplifier, follow these steps:
1. Use a 16-12 gauge speaker wire.
2. Connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier's LEFT channel.
3. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your amplifier's LEFT channel.
4. Repeat the above procedure for connecting all remaining speakers to the appropriate amplifier channels.
Make sure that no bare wires from any of the connections touch any other terminals, as this could cause a short and damage your equipment.
Please refer to Figure 3 in the user manual for a visual representation of the standard connections.
It is important to note that Klipsch speakers are highly efficient and can operate easily on a wide variety of amplifiers. However, it is recommended to check with your dealer or amplifier manual to ensure that your particular amplifier is best suited for your application.
Always exercise caution with the volume control and avoid excessive volume over long periods, as it can permanently damage your hearing.
Add New Comment