User Manual Q&AAnswer
Nov 07, 2024 - 01:43 AM
To connect the Bose Acoustimass Horizontal Cube Center Channel Speaker to your audio receiver or amplifier, follow these steps:
1. Identify the appropriate cables: Check your audio receiver's manual to determine the type of cable you need. Most commonly, you will use an RCA or speaker wire cable.
2. Locate the speaker connections on your receiver: Look for the designated speaker outputs on the back of your audio receiver. They are typically labeled "Center" or "Center Channel."
3. Connect the speaker cable: If using an RCA cable, plug one end into the "Center" or "Center Channel" output on your receiver and the other end into the corresponding input on the back of the Bose Acoustimass Horizontal Cube Center Channel Speaker. If using speaker wire, strip the ends of the wire and connect them to the appropriate terminals on both the receiver and the speaker. Ensure a secure connection.
4. Double-check the polarity: Make sure the positive (+) and negative (-) terminals on both the receiver and speaker are correctly aligned. This ensures proper phase alignment and prevents any audio distortion.
5. Power on your audio system: Once the connections are secure, power on your audio receiver or amplifier.
6. Adjust the receiver settings: Access your receiver's menu or settings to ensure it recognizes the center channel speaker. You may need to assign the speaker to the appropriate channel or adjust the speaker settings.
7. Test the audio: Play a movie or music with dialogue to test the sound output from the Bose Acoustimass Horizontal Cube Center Channel Speaker. Adjust the volume and balance settings as needed to achieve the desired sound.
For more specific instructions or troubleshooting guidance, refer to the user manual provided with your Bose Acoustimass Horizontal Cube Center Channel Speaker.
Add New Comment