User Manual Q&AAnswer
Nov 07, 2024 - 01:05 AM
To install the Honeywell SPCWL Indoor Selectable Output Speaker, follow these steps:
1. Attach a universal mounting plate to a 4 x 4 x 2 1/8 inch back box. If you are doing a flush-mount application, an extension ring is not required.
2. Connect the notification appliance circuit or speaker wiring to the terminals on the mounting plate.
3. To attach the speaker or speaker strobe to the mounting plate, insert the product tabs into the mounting plate grooves.
4. Hinge the device into position to lock the product pins into the mounting plate terminals.
5. A catch temporarily holds the device in place until you secure the device with a captured mounting xxxx .
For more detailed instructions and illustrations, please refer to the Honeywell SPCWL Indoor Selectable Output Speaker manual.
Add New Comment