User Manual Q&AAnswer
Nov 07, 2024 - 01:03 AM
To connect the Rane Pager Dynamic Microphone Paging Station to your audio system, follow these steps:
1. Locate the XLR connector on the back of the Rane Pager unit.
2. Connect the provided gooseneck dynamic microphone to the XLR connector.
3. Ensure that the microphone is securely connected and positioned correctly.
4. Identify the appropriate XLR input on your audio system or mixer.
5. Connect the other end of the microphone cable to the XLR input on your audio system.
6. Make sure the connection is secure.
7. If you are using a condenser microphone that requires phantom power, ensure that your audio system or mixer is capable of providing 24V phantom power.
8. Power on your audio system and the Rane Pager unit.
9. Refer to the Rane Pager Dynamic Microphone Paging Station User Guide for further instructions on configuring the unit for your specific paging needs.
For a more detailed step-by-step guide, please refer to the Rane Pager Dynamic Microphone Paging Station User Guide provided above. It contains comprehensive instructions and diagrams to assist you in setting up and configuring the Rane Pager for optimal performance.
Add New Comment