User Manual Q&AAnswer
Nov 07, 2024 - 12:40 AM
To connect the Rode Broadcaster microphone to your audio interface or mixer, you will need an XLR cable. Here are the steps to follow:
1. Make sure your audio interface or mixer is turned off and unplugged from the power source.
2. Locate the XLR input on your audio interface or mixer. It is usually labeled as "Mic Input" or "XLR Input."
3. Take one end of the XLR cable and plug it into the XLR output on the Rode Broadcaster microphone.
4. Take the other end of the XLR cable and plug it into the XLR input on your audio interface or mixer.
5. Make sure the connections are secure and tight.
6. Turn on your audio interface or mixer and adjust the input gain for the microphone channel.
7. Test the microphone by speaking or singing into it and monitoring the audio levels on your audio interface or mixer.
Please refer to the Rode Broadcaster microphone instruction manual for more detailed information on connecting and setting up the microphone with your specific audio interface or mixer.
Add New Comment