User Manual Q&AAnswer
Nov 07, 2024 - 12:23 AM
Connecting the Sylvania SL-750-BX On-Wall Bookshelf Speakers to your amplifier or receiver is a simple process. Here are the step-by-step instructions:
1. Identify the terminals on the back of each speaker. They are typically labeled as "+" and "-".
2. Take the positive (+) wire from your amplifier or receiver and connect it to the positive (+) terminal on one of the speakers. Ensure a secure connection by inserting the wire into the terminal or using banana plugs or spade connectors if compatible.
3. Take the negative (-) wire from your amplifier or receiver and connect it to the negative (-) terminal on the same speaker. Again, ensure a secure connection.
4. Repeat steps 2 and 3 for the second speaker, connecting it to the corresponding terminals on your amplifier or receiver.
5. Double-check that the polarity is correct, meaning the positive (+) wire is connected to the positive (+) terminal and the negative (-) wire is connected to the negative (-) terminal on both speakers.
6. Once the connections are secure, power on your amplifier or receiver.
7. Test the speakers by playing audio through your system. Ensure that sound is coming from both speakers and adjust the volume as desired.
Note: It's important to verify that your amplifier or receiver is compatible with the SL-750-BX speakers in terms of power output and impedance. Using an amplifier that exceeds the recommended power range can damage the speakers. Refer to the product specifications or consult the manual for your amplifier or receiver for compatibility information.
By following these steps, you should be able to successfully connect the Sylvania SL-750-BX On-Wall Bookshelf Speakers to your amplifier or receiver and enjoy high-quality audio.
Add New Comment