User Manual Q&AAnswer
Nov 06, 2024 - 10:38 PM
To connect the SGPRO UX-8 Condenser Microphone to your computer, follow these steps:
1. Determine the type of connection you want to use. The SGPRO UX-8 offers both USB and XLR connectivity options.
2. If you want to use the USB connection, simply plug the USB cable into the USB port on your computer and the other end into the USB port on the microphone.
3. If you prefer to use the XLR connection, you will need an XLR cable. Connect one end of the XLR cable to the XLR port on the microphone and the other end to an audio interface or mixer that has an XLR input.
4. Once the microphone is connected, make sure it is receiving power. If you are using the XLR connection, ensure that your audio interface or mixer provides 48V phantom power if required.
5. Set up your recording software or application on your computer. Select the SGPRO UX-8 as the input device in your recording software settings.
6. Adjust the microphone gain on your audio interface or mixer to set the desired input level. This will prevent distortion and ensure optimal recording quality.
7. You are now ready to start recording with the SGPRO UX-8 Condenser Microphone. Test the microphone by speaking or singing into it and monitor the audio through headphones connected to your audio interface or mixer.
Note: For detailed instructions and additional troubleshooting tips, refer to the user manual provided with the SGPRO UX-8 Condenser Microphone.
Add New Comment