User Manual Q&AAnswer
Nov 06, 2024 - 10:37 PM
To connect the Neumann BCM 705 microphone to your recording device, you will need an XLR cable. The microphone has a male 3-pin XLR connector, which should be plugged into the corresponding female XLR input on your recording device. The pin assignments for the XLR connector are as follows: Pin 1 is for 0 V/ground, Pin 2 is for modulation (+phase), and Pin 3 is for modulation (-phase). Make sure to match the pin assignments correctly to ensure proper audio signal transfer. Once connected, you can start using the microphone for your recording purposes.
Add New Comment