User Manual Q&AAnswer
Nov 06, 2024 - 10:21 PM
To connect the Turnstile Audio TAP500 microphone to your audio equipment, follow these steps:
1. Identify a suitable XLR input on your audio equipment, such as an audio interface, mixer, or recording device.
2. Take the XLR cable provided with the microphone and connect one end to the XLR output on the microphone.
3. Connect the other end of the XLR cable to the XLR input on your audio equipment.
4. Ensure that the connection is secure and tight to avoid any audio signal loss.
5. If your microphone requires phantom power, make sure it is enabled on your audio equipment. Check the microphone's user manual to confirm if phantom power is necessary.
6. Once the microphone is connected, you can configure it as the input source in your recording software or audio device settings.
Please refer to the user manual for more detailed instructions and illustrations on connecting the Turnstile Audio TAP500 microphone to your specific audio equipment.
Add New Comment