Answer
Nov 06, 2024 - 10:20 PM
To connect the Neumann TLM 103 microphone to your audio interface, follow these steps:
1. Make sure your audio interface is powered on and connected to your computer.
2. Locate the XLR connector on the Neumann TLM 103 microphone.
3. Connect one end of an XLR cable to the XLR connector on the microphone.
4. Connect the other end of the XLR cable to the XLR input on your audio interface.
5. Ensure that the phantom power on your audio interface is turned on. The Neumann TLM 103 requires 48V phantom power to operate.
6. Once the microphone is connected and phantom power is enabled, you can adjust the input gain on your audio interface to achieve the desired recording level.
Please refer to the operating instructions manual for more detailed information on connecting and using the Neumann TLM 103 microphone with your specific audio interface.
Add New Comment