User Manual Q&AAnswer
Nov 06, 2024 - 10:18 PM
To connect the Boytone BT-72SM Condenser Microphone to your computer, follow these steps:
1. Check your computer's available ports: Make sure your computer has an XLR input port. If not, you may need an audio interface that supports XLR connections.
2. Locate the XLR cable: The Boytone BT-72SM Condenser Microphone package should include an XLR cable. Find the XLR cable with male and female connectors.
3. Connect the XLR cable: Plug the male end of the XLR cable into the microphone's XLR output connector. Then, connect the female end of the XLR cable to the XLR input on your computer or audio interface.
4. Set up phantom power: If your microphone requires phantom power, make sure it is enabled on your audio interface or mixer. Phantom power is necessary for the Boytone BT-72SM to operate correctly.
5. Configure audio settings: Open your computer's audio settings and select the Boytone BT-72SM as the input device. Adjust the input level as needed.
6. Test the microphone: Open your preferred recording software or communication application and check if the Boytone BT-72SM is recognized as the input device. Speak into the microphone and monitor the audio levels to ensure it is working correctly.
Note: It's important to refer to the user manual for your specific computer and audio interface instructions, as the process may vary slightly depending on your setup.
Add New Comment