Answer
Nov 06, 2024 - 10:13 PM
To connect the CAD GXL2200 microphone to your audio interface or mixer, follow these steps:
1. Ensure that your audio interface or mixer provides +48V phantom power, as the GXL2200 requires this to operate.
2. Locate the XLR connector on the microphone. It is a 3-pin XLR type connector.
3. Take an XLR cable and connect one end to the XLR connector on the GXL2200 microphone.
4. Connect the other end of the XLR cable to the corresponding XLR input on your audio interface or mixer.
5. Make sure the connections are secure and tight to avoid any audio signal loss.
6. Once connected, you can adjust the input gain on your audio interface or mixer to achieve the desired recording level.
Please refer to the user manual for your specific audio interface or mixer for more detailed instructions on connecting microphones.
Add New Comment