User Manual Q&AAnswer
Nov 06, 2024 - 10:02 PM
To pair the SONRU SR-B7 Bluetooth 5.0 Receiver with your device, please follow these steps:
1. Power on the SR-B7 by pressing and holding the power button for a few seconds until it turns on.
2. Press the Bluetooth button on the SR-B7 for approximately 5 seconds until the LED indicator starts flashing rapidly. This indicates that the receiver is in pairing mode.
3. On your Bluetooth-enabled device (e.g., smartphone), go to the Bluetooth settings and enable Bluetooth.
4. Search for available Bluetooth devices and select "SONRU SR-B7" from the list of available devices.
5. Once you select the SR-B7, the devices will begin pairing. The LED indicator on the SR-B7 will stop flashing and remain solid when the pairing is successful.
6. After pairing, you can play audio on your paired device, and the sound will be transmitted to the audio device connected to the SR-B7.
Note: If you encounter any issues during the pairing process, ensure that both the SR-B7 and your device are within the recommended Bluetooth range (usually 33 feet or 10 meters) without obstructions. You can also try clearing the SR-B7's pairing history by pressing and holding the Bluetooth button for about 8 seconds until the LED indicator alternates between red and blue. Then, attempt the pairing process again.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment