User Manual Q&AAnswer
Nov 06, 2024 - 09:40 PM
After replacing the battery in your EDIFIER CineSound B3 Replacement Remote, there is no need to perform any additional setup. Simply follow these steps:
1. Open the battery compartment on the back of the remote. Refer to the illustration in the manual for guidance.
2. Insert a new CR 2025 battery into the compartment, ensuring that the positive (+) pole faces up.
3. Close the battery compartment securely.
4. Your remote should now be ready to use. Point it towards your EDIFIER CineSound B3 Soundbar and press the desired buttons to control your audio settings.
If the remote control doesn't work after inserting a new battery, make sure the battery is correctly installed with the positive (+) pole facing up. Check for any visible damage to the remote or battery compartment. If the issue persists, contact the seller or supplier for assistance.
Add New Comment