User Manual Q&AAnswer
Nov 06, 2024 - 09:39 PM
To program the Samsung AH59-02632A SoundBar Replacement Remote to work with your Samsung Sound Bar System, follow these steps:
1. Make sure the batteries are properly installed in the remote control. Refer to the "Installing the Batteries" section in the user guide for instructions.
2. Ensure that your Samsung Sound Bar System is powered on and in a ready state.
3. Point the replacement remote towards the soundbar, ensuring there are no obstructions between the remote and the soundbar.
4. Press and hold the "POWER" button on the replacement remote for a few seconds until the soundbar powers off. This indicates that the remote is in programming mode.
5. Release the "POWER" button and immediately press the "VOLUME +" button on the replacement remote. The soundbar should power on.
6. Test the functionality of the replacement remote by adjusting the volume using the dedicated "VOLUME +" and "VOLUME -" buttons.
Note: The programming steps may vary slightly depending on the specific model of your Samsung Sound Bar System. Refer to the user guide provided with your soundbar for any additional instructions or troubleshooting tips.
For more information and detailed instructions, please refer to the user guide that came with your Samsung AH59-02632A SoundBar Replacement Remote.
Add New Comment