User Manual Q&AAnswer
Nov 06, 2024 - 09:35 PM
To adjust the sensitivity of the Niles LS1 Automated Light Sensor, follow these steps:
1. Locate the sensitivity control on the LS1. It can be adjusted using a small screwdriver or similar tool.
2. Use the screwdriver to turn the sensitivity control either clockwise or counterclockwise.
3. Turning the control clockwise will increase the sensitivity of the sensor, making it more responsive to changes in ambient light.
4. Turning the control counterclockwise will decrease the sensitivity, making the sensor less responsive to changes in ambient light.
5. Experiment with different sensitivity settings to find the optimal trigger level for your specific setup and preferences.
6. Test the functionality of the LS1 by observing its response to changes in ambient light and its output to connected devices.
7. Verify that it triggers the desired actions in your audio/video system when components are powered on or off.
8. Fine-tune the sensitivity as needed to ensure the LS1 responds optimally to changes in ambient light.
Note: It's important to follow the manufacturer's recommendations and guidelines when adjusting the sensitivity of the LS1 to avoid any potential issues or improper functionality.
Add New Comment