User Manual Q&AAnswer
Nov 06, 2024 - 09:31 PM
To install the DS18 WAVESSUB10 Marine Subwoofer Speakers, follow these steps:
1. Prior to installation, ensure that the power source is turned off to prevent any electrical hazards.
2. Position the speakers in the desired location, making sure they are securely mounted or placed.
3. Connect the speaker wires from your audio source or amplifier to the appropriate terminals on the speakers, following the polarity instructions below.
Polarity Instructions:
The DS18 WAVESSUB10 speakers are polarity-coded. Ensure that you connect the positive (+) terminal on the speaker to the positive terminal on your amplifier or audio source, and the negative (-) terminal to the corresponding negative terminal. Matching these correctly is crucial for proper sound reproduction.
4. Once the speakers are securely connected, you can turn on the power source and test the audio output.
Note: It is recommended to consult a professional or refer to the user manual of your specific car or boat for detailed installation instructions, as the process may vary depending on the vehicle or vessel.
Please refer to the "Installation" section in the DS18 WAVESSUB10 Marine Subwoofer Speakers User Manual for further guidance and illustrations.
Add New Comment