Answer
Nov 06, 2024 - 09:21 PM
To pair the KAIY C36 Bluetooth Receiver with your smartphone, follow these steps:
1. Ensure that the receiver is powered on and in pairing mode. You can typically put the receiver in pairing mode by pressing and holding the Bluetooth button until the LED indicator starts flashing.
2. On your smartphone, go to the Bluetooth settings. This can usually be found in the settings menu or the quick settings panel.
3. Enable Bluetooth on your smartphone if it is not already enabled.
4. In the Bluetooth settings, search for available devices. The KAIY C36 Bluetooth Receiver should appear in the list of available devices. It is usually identified as "KAIY C36" or a similar name.
5. Tap on the KAIY C36 Bluetooth Receiver in the list of available devices to initiate the pairing process.
6. If prompted, enter a PIN or passcode to complete the pairing process. The default PIN for the KAIY C36 Bluetooth Receiver is often "0000" or "1234". Refer to the user manual for the specific PIN if it differs.
7. Once the pairing is successful, the LED indicator on the receiver should stop flashing and remain solid or turn off, indicating a successful connection.
8. You can now start streaming audio from your smartphone to the KAIY C36 Bluetooth Receiver. Adjust the audio source settings on your smartphone to output audio to the receiver.
Note: The pairing process may vary slightly depending on your smartphone's operating system version and user interface. Refer to your smartphone's user manual or online support resources for specific instructions on Bluetooth pairing.
For more detailed instructions and troubleshooting tips, please refer to the user manual included with the KAIY C36 Bluetooth Receiver.
Add New Comment